Call Center/Customer Contact Center Services (CCS) provides a cost effective multi-media contact center solution to enable Agencies to efficiently and effectively deliver customer service to their clientele across multiple contact channels (voice, fax, email, and Internet website, etc) by providing a single network call queue or multiple call queues (where applicable). The Call Queue Management Service of the CSS provides real-time management of routing and distribution of multi-media calls from multiple channels to the call center. CCS is available for single site, multiple site, and enterprise wide Agency contact centers.
CCS may be used in conjunction with Toll Free and other network services to facilitate Agency communications with the general public, businesses, and other Agencies. Along with the Call Queue Management Service, CCS provides a Call Answering Service that enables Agencies to utilize contractor provided resources to respond to caller inquiries. The call answering resources can be situated at either an Agency location(s) or a contractor location(s).
CCS is an application layer service that will interoperate with Internet and Public Switched Telephone Network (PSTN) using underlying network service(s) and their interfaces to deliver customer service capabilities. CCS may be ordered as a domestic (CONUS and OCONUS) or non-domestic service. The majority of contractor's support platforms are located in CONUS and the geographical scope for the local, national, and international coverage will vary with the contractor's network.
The diagram below shows a typical CCS configuration.
CCS provides a wide range of mandatory and optional Technical Capabilities and Service Functionalities which are described in detail in Section C.2.11.2.1.4 of the Networx Contracts. The following is a brief summary of these capabilities.
1. Delivery Methods. CCS provides five independent service delivery methods listed below. Three are service delivery methods for Call Management service and two for Call Answering service:
2. Call Management Service (Network Call Queue). This service provides many service management capabilities as briefly listed below:
3. Call Answering Service - Capabilities include complete turnkey call center operation, including the appropriate network services, technology, personnel, business processes and workflows, training, and reporting to respond to caller inquiries and meet pre-determined performance.
4. Call Answering Resources - Capabilities included are briefly listed below:
CCS also provides a wide range of service features that are listed below and described in the Networx Contracts Section C.2.11.2.2.1 of the Networx Contracts.
* The optional CBAP requirement may not be provided by all Networx contractors.
CCS was not offered on the original FTS2001 contracts. Each Networx contractor may provide variations or alternatives to the offering and pricing for CCS. The specific details can be found within each contractor's Networx contract files and pricing notes for CCS.
For more information on the general CCS specifications and requirements, please refer to Section C.2.11.2 of the Networx contract for technical specifications and Section B.2.11.2 for pricing.
(CCS) provides a network-based call queue that enables the intelligent routing of calls, from multiple channels, to a call center as part of the basic service. CCS also offers an outsourced call answering service. Operations for the Call Answering service may be performed either at the Agency location or the contractor location.
There are three (3) CCS Call Management Service configurations for the basic service:
There are two (2) CCS Call Answering Service configurations available with the basic service (if required by an Agency):
For all of the CCS delivery methods, a service initiation charge applies for systems design and integration and software development. CCS was not offered on the original FTS2001 contracts.
For CPCB, there is a NRC and MRC for each terminal device and a NRC and MRC for each concurrent user. A terminal device is a phone/IP phone or soft phone that is installed and configured in the contact center. A concurrent user is a call answering resource that is logged into the call routing system at the same time as other call answering resources.
The CPCB NRCs will be used by Agencies for both the initial and incremental (or subsequent) provisioning of terminal devices and concurrent users for their call center / customer contact center. The CPCB NRCs are determined from the corresponding volume bands containing the number of terminal devices or concurrent users needed. For each call center / customer contact center, the contractor determines the MRCs for each month from the corresponding volume bands that contain the maximum number of terminal devices in use or maximum number of concurrent users for that month.
Price components required for CCS CPCB:
** Some or all price components are priced on an Individual Case Basis (ICB). CLINs with ICB prices are not available in the unit pricer.
Example 1: CPCB with 100 IP Phones and 70 Concurrent Users
For CPAB, there is a NRC and MRC for each terminal device and a NRC and MRC for each concurrent user. The CPAB NRCs for initial provisioning are determined from the corresponding volume bands containing the number of terminal devices or concurrent users needed. For each call center / customer contact center, the contractor determines the MRCs for each month from the corresponding volume bands that contain the maximum number of terminal devices in use or maximum number of concurrent users for that month.
In addition, there is a separate NRC for the incremental provisioning of terminal devices or concurrent users. CPAB NRCs for incremental provisioning have no volume bands.
Price components required for CCS CPAB:
** Some or all price components are priced on an Individual Case Basis (ICB). CLINs with ICB prices are not available in the unit pricer.
Example 2: CPAB with 100 IP Phones and 70 Concurrent Users
For CBAP the initial ICB NRC additionally includes the initial installation of any routing and distribution equipment. CBAP is priced on an ICB.
Price components required for CCS CBAP:
** Some or all price components are priced on an Individual Case Basis (ICB). CLINs with ICB prices are not available in the unit pricer.
CPAL and CPCL are priced on an ICB.
Price components required for CCS CPAL and CPCL:
** Some or all price components are priced on an Individual Case Basis (ICB). CLINs with ICB prices are not available in the unit pricer.
This document only addresses the CCS service at contract award. Each Networx contractor may provide variations or alternatives to the offering and pricing for CCS. The specific details can be found within each contractor's Networx contract files and pricing notes for CCS.
For more information on the general CCS specifications and requirements, please refer to Section C.2.11.2 of the Networx contract for technical specifications and Section B.2.11.2 for pricing.